Arduino error during upload |
您所在的位置：网站首页 › esp32 efuse › Arduino error during upload |
Arduino error during upload
|
When you disconnect everything and load a blank sketch does the issue go away? Help us help you. Please follow the advice given in the link below when posting code, in particular the section entitled 'Posting code and common code problems' Use code tags (the icon above the compose window) to make it easier to read and copy for examination 
How to get the best out of this forum Installation & Troubleshooting
Hello,
Welcome to the Arduino Forum.
This guide explains how to get the best out of this forum. Please read and follow the instructions below.
Being new here you might think this is having rules for the sake of rules, but that is not the case. If you don’t follow the guidelines all that happens is there is a long exchange of posts while we try to get you to tell us what we need in order to help you, which is frustrating for you and frustrating for us.
The people who try to help with your pro…
Use the IDE autoformat tool (ctrl-t or Tools, Auto format) before posting code in code tags. Please include the entire error message. It is easy to do. There is a button (lower right of the IDE window) called "copy error message". Copy the error and paste into a post in code tags. Paraphrasing the error message leaves out important information. Please post a schematic. Please post an image of your project. Please describe the problem better then you just did. |
【本文地址】